 |
 |
 |
 |
| Auto-Clip System | Wheel Configuration | Follow-up pressure | Automatic Emendation Procedure |
| Use of third gear pressure on the lens without damage | Standard configuration of four wheels( Resin coarse grading wheel/ Glass coarse grinding wheel, V-flat edge/ sharp edges fine grinding wheel, flat resin edge/sharp edges polished wheels) | It can increase the pressure automatically through the control of procedure during the start of the grinding which can ensure that no harm to the lens | Automatic emendation of the lens size, initial zero proof reading during the start of grinding, obvious improvement of precision. |
Direction of Control Panel:
- PC, CR , GL lens selector
- test switch
- chuck press selector
- frame selector
- beveling and framelss selector
- minus (-) switch
- plus (+) switch
- re-edging switch
- shift ( left ) switch
- shift ( right) switch
- start switch
- stop switch
- lens-clamping switch
- lens-loosening switch
Specification:
- The size of Diamond wheel: CR Wheel: 100*16 mm, Glass Wheel: 100*16 mm
V Groove Wheel: 100*23 mm, Polishing wheel: 100*11 mm
- Diameter of processed lenses: 22mm ~100mm.
- The processing type: pointy edges, platband, bevel polishing.
- The lens material: CR, Glass, PC.
- Range of adjustable measurement: -6.0mm~+6.0mm(0.05mm/step).
- Dimension of figure: 510(L)×490(W)×400(H)mm.
- Weight: 49KG.
- Electric Voltage: 220V±10%/110V±10% 50HZ/60HZ.
- Power: 500W.
- a. Polishing wheel: used for polishing resin lenses
- b. Rough grinding wheel: used for roughly grinding glass lens
- c. Fine grinding wheel: used for bevelled style or flat style grinding
- d. PC rough grinding Wheel: used for roughly grinding PC or resin lens
